Product Overview

Mendip shower trays have a built-in waste gully for ease of installation where the floor cannot be breached, as is often the case in situations such as multi-storey apartments.

The waste gully is housed beneath the tray, which is 100mm high.  A 50mm half step or full height sloping ramp is also available to provide easier access.

Technical Details

All Mendip Trays include a factory fitted waste trap. The compact above ground waste has a swivel outlet for drainage positioning. It has a 40mm outlet and a 50mm water seal.

Designed to be used with single feed instantaneous electric showers with a flow rate no more than 6 litres per minute.

Waste pumps are generally not required with the Mendip shower tray.  Please enquire if further advice is required.
These highly robust trays require no bedding down as the high manufacturing specification allows them to be fully self-supporting.

Available in 7 sizes:

900 x 900mm     (MEN501)
1000 x 1000mm (MEN601)
1250 x 710mm   (MEN101)
1250 x 830mm   (MEN201)
1500 x 710mm   (MEN301)
1500 x 830mm   (MEN401)
1850 x 710mm   (MEN701)*

*cut to length version with 2 end caps supplied - trim with suitable power tool

Optional access ramp (MEN/R01) or step available (MEN/P01)