Product Overview
Level-Dec is the original level-access shower floor former from
Impey Showers and is designed for use with slip-resistant vinyl
floor coverings.
It is an all-in-one moulded shower floor that has the drainage
gradient already built in and it can be fitted with ease into most
floor types and in almost any location. Level-Dec is available in a
wide range of shapes and sizes, plus there is also a cut-to-length
option for precise fitting in alcoves. It is compatible with waste
pumps too, for those locations where gravity drainage is not
possible.
Technical Details
Level-Dec is 22mm thick and is suitable for installation into
timber and concrete floors. Level-Dec is available in 10 size
options and can be trimmed by up to 50mm on the perimeter, unless
stated otherwise.
900 x 900mm (LD16)
1000 x 1000mm (LD2)
1200 x 1200mm (LD7)
1300 x 800mm (LD1)
1400 x 900mm (LD6)
1500 x 800mm (LD3)
1750 x 750mm (LD14)
1700 x 850mm (LD15)
1850 x 900mm (LD8)*
800 x 800mm (LD5)**
*LD8 is designed to allow the installer to trim the length by up
to 200mm from each end and by up to 75mm along its length. Maximum
trimming would make the shower zone 1450mm x 750mm.
**LD5 features a structural up-stand as part of the design and
can only be trimmed on 2 sides.
Level-Dec is supplied with a WSF1/H shower trap. Alternatives
are available if required and should be requested when
ordering.