How much will I need?
For complete peace of mind and a guaranteed leak-free wetroom
Impey recommend that Impey Tilesafe® is applied over the entire
floor of the wetroom.
Impey Tilesafe® should be applied to a minimum height of 75mm
where the walls of the room meet the floor. In each kit you will
- 5m2 or 10m2 of Impey Tilesafe® tanking membrane
- Bottle of Tilesafe® primer
- Reinforcing tape
- Tube of jointing compound
- Block of Impey Tilesafe® putty
Note: Because Impey Tilesafe® is a bitumen-based product it is
ONLY suitable for use with the Aquamat 100
undertile heating system. Other systems may run at higher
temperatures and compromise the integrity of the tanking
What type of tile adhesive should be used?
Any proprietary flexible tile adhesive can be used with the
waterproofing system. Tile adhesive must be a single-part
flexible cement based adhesive. Do NOT use a ready mix
adhesive or epoxy based grout. For a compatible epoxy tanking system
please use Waterguard