Placeholder

Can a wetroom be installed in a bedroom?

Yes, a wetroom can be installed in a bedroom. Converting part of a bedroom into a level-access wetroom is a practical and increasingly popular solution, particularly for people with mobility challenges who benefit from having a shower space directly accessible from their sleeping area. The sections below answer the most common questions about bedroom wetroom installations, from structural requirements and planning rules to costs and accessibility benefits.

What are the main requirements for installing a wetroom in a bedroom?

Installing a wetroom in a bedroom requires three core elements to be in place: a properly graded floor that directs water to a drain, a fully waterproofed wet area, and adequate plumbing connections for water supply and waste removal. Without all three working together, a bedroom wetroom will not perform safely or durably.

Beyond the technical fundamentals, there are several practical requirements to assess before work begins:

  • Floor structure: The existing floor must be capable of supporting the installation. For timber joisted floors, a floor former that sits between joists, such as a 22 mm GRP former, can replace floorboards directly, keeping disruption to a minimum. Concrete floors require a different approach using a bonded grading system.
  • Gradient: Water must flow consistently toward the drain. A 1:40 gradient is the standard used across professional wetroom installations, and this should be built into the floor former rather than relying on hand screeding, which carries a risk of inconsistency.
  • Drainage: A drain must be positioned within the wet area, with a clear waste route to the soil stack or existing pipework. The route needs to be planned before installation begins, as repositioning drainage after the floor is laid is disruptive and costly.
  • Waterproofing: The entire wet zone, floor and walls, must be fully tanked to prevent moisture penetrating the building structure. This is the single most critical stage of any wetroom installation.
  • Ventilation: A bedroom wetroom generates significant humidity. Mechanical ventilation is essential to prevent condensation, damp, and mould affecting the wider room.
  • Space: There must be sufficient floor area to create a functional showering zone while leaving usable bedroom space. For wheelchair users, turning circles and transfer space must also be factored into the layout.

A practical pre-installation checklist should cover: assessing the room’s condition and floor construction; planning the layout of the wet area; selecting the method for producing the gradient; choosing the correct drain type; and determining the waterproofing system. Addressing each of these in sequence prevents costly changes mid-installation.

Does a bedroom wetroom need planning permission in the UK?

In most cases, installing a wetroom in a bedroom does not require planning permission in the UK. Internal alterations of this kind typically fall within permitted development rights, meaning you can proceed without submitting a planning application. However, there are circumstances where permission or approval may be needed.

If the property is a listed building, any internal structural changes, including wetroom installation, will require listed building consent. Properties in conservation areas may also face additional restrictions, and it is always worth checking with the local planning authority before work begins if there is any uncertainty.

While planning permission is rarely needed, Building Regulations approval is a separate matter and is more likely to apply. Work involving changes to drainage, plumbing, or structural elements may need to comply with relevant parts of the Building Regulations, including Part P (electrical safety) if new circuits are installed, and Part M if the installation is being designed for accessibility. In adaptation projects funded through a Disabled Facilities Grant, compliance with Building Regulations is a standard requirement.

It is always advisable to consult your local authority or a qualified installer before starting work to confirm which approvals apply to your specific property and circumstances.

How does waterproofing work in a bedroom wetroom?

Waterproofing a bedroom wetroom, often called tanking, involves creating a continuous, watertight barrier across the floor and walls of the wet zone to prevent water and moisture from penetrating the building structure. Without effective waterproofing, water will eventually cause significant and costly damage to floors, walls, and the rooms below.

There are three principal approaches to wetroom waterproofing:

  • Waterproofing membranes: Self-adhesive sheet membranes are widely regarded as the most reliable and efficient method. They require no drying time, incorporate decoupling properties that protect tiles from minor structural movement, and can be applied to a range of substrates including plaster, cement, and plywood. Tiling can begin immediately after application.
  • Paint-on systems: Liquid waterproofing compounds are brushed or rolled onto the surface. These require a drying period of 12 to 24 hours between coats and are more susceptible to weak spots if applied unevenly. They do not offer the decoupling properties of membrane systems.
  • Waterproof boards: Rigid boards provide a waterproof substrate for tiling but have limited decoupling properties, require a longer installation process, and add height to the floor, which can be a consideration in bedroom conversions where floor levels matter.

For bedroom wetrooms, membrane systems are generally the preferred choice. They minimise installation time, reduce the risk of water ingress at joints and edges, and are compatible with underfloor heating systems, a popular addition in accessible bedroom wetrooms where warmth underfoot improves comfort and safety. In accessible applications where vinyl rather than tile is the preferred floor finish, the waterproofing approach is adapted accordingly, but the principle of creating a fully sealed wet zone remains the same.

Can a bedroom wetroom be installed upstairs?

Yes, a wetroom can be installed in an upstairs bedroom. The majority of wetroom installations in UK homes take place on upper floors, and the technical principles involved are the same whether the installation is on the ground floor or above. The key difference is that an upstairs installation demands particularly rigorous waterproofing, because any water ingress will affect the ceiling and structure of the room below.

For an upstairs bedroom with a timber joisted floor, the floor construction must be carefully assessed before installation begins. The installer needs to establish the condition and level of the existing floor, identify the positions of joists and any underfloor obstructions such as pipes or cables, and plan the waste route to connect with the soil stack. A GRP floor former designed to sit between joists, at just 22 mm thick, equivalent to a standard floorboard, keeps the floor height consistent with the rest of the room and avoids the need for a raised threshold.

The waste outlet position is one of the more complex considerations on an upper floor. Drain systems with offset waste outlets that can be repositioned through 180 degrees give installers the flexibility to route pipework around joists and other obstructions without compromising the gradient or requiring structural alterations. Careful planning of the waste route before installation begins is essential to avoid complications once the floor is opened up.

Provided the waterproofing is executed correctly and the drainage is properly connected, an upstairs bedroom wetroom performs just as effectively as one on the ground floor.

Is a bedroom wetroom a good option for wheelchair users or elderly people?

A bedroom wetroom is an excellent option for wheelchair users, elderly people, and anyone with reduced mobility. Having a level-access shower space directly connected to, or within, the bedroom removes one of the most significant barriers to independent daily hygiene: the need to navigate between rooms and negotiate step-over shower trays or bath edges. For people who find that journey difficult or risky, a bedroom wetroom can make a meaningful difference to both safety and dignity.

The level-access design of a wetroom eliminates the step-over threshold entirely, allowing wheelchair users to roll directly into the shower area and carers to provide assistance without awkward positioning. This is particularly important for people recovering from illness or injury, those with progressive conditions, or older people who want to remain living independently in their own homes for as long as possible.

Several product features make a bedroom wetroom especially well-suited to accessible use:

  • Seated showering: A wall-mounted fold-flat shower seat with a 300 kg weight limit and minimal projection when folded keeps the shower area unobstructed when the seat is not in use.
  • Support and grip: Modular grab rail systems with flat gripping surfaces and RNIB colour-coded contrast can be configured to suit the specific needs of the user, providing support during transfers and while showering.
  • Half-height shower doors: Designed for assisted showering, these doors allow a carer to reach in and assist without entering the wet area, while still providing a degree of enclosure and privacy for the user.
  • Slip resistance: Floor finishes with appropriate slip ratings are essential in any accessible wetroom, and the floor former and drain system should be selected with this in mind.
  • Underfloor heating: Warm floors improve comfort and reduce the shock of stepping onto a cold surface, which can be particularly beneficial for older users or those with circulatory conditions.

Accessible bedroom wetrooms do not need to look clinical or institutional. With the right products and careful specification, a level access shower bedroom can be both fully functional and genuinely attractive, an important consideration for people who want their home to remain a comfortable, dignified space.

What does a bedroom wetroom installation typically cost in the UK?

The cost of installing a wetroom in a bedroom in the UK varies considerably depending on the size of the wet area, the complexity of the plumbing, the floor construction, the products specified, and the finish chosen. As a general guide, a straightforward bedroom wetroom conversion typically starts from around £3,000 to £5,000 for a basic installation, with more complex or fully accessible projects often ranging from £6,000 to £10,000 or more.

The main cost components to account for include:

  • Floor preparation and former: Opening up the floor, installing the grading system, and connecting drainage is typically the most labour-intensive part of the project, particularly on upper floors with timber joists.
  • Waterproofing: Tanking the wet area properly is non-negotiable and should never be treated as a place to cut costs, inadequate waterproofing leads to far more expensive remedial work later.
  • Plumbing: Connecting the water supply and routing the waste to the soil stack adds to the cost, especially if the bedroom is located far from existing pipework.
  • Tiling or vinyl floor finish: Material and labour costs vary widely depending on the tile specification or vinyl product chosen.
  • Accessibility products: Grab rails, shower seats, half-height doors, and other accessible fittings add to the overall cost but are often essential for the installation to meet the user’s needs.
  • Ventilation: Installing or upgrading mechanical ventilation in the bedroom adds a further cost but is a necessary part of any bedroom wetroom project.

For homeowners adapting a bedroom for disability or reduced mobility, it is worth exploring whether a Disabled Facilities Grant (DFG) could contribute to the cost. DFGs are means-tested grants administered by local authorities that can fund adaptations, including wetroom installations, up to a maximum of £30,000 in England. An Occupational Therapist assessment is typically the starting point for a DFG application.

How Impey Showers helps with bedroom wetroom installations

Impey Showers provides a complete system for bedroom wetroom conversions, combining over 25 years of wetroom expertise with products specifically engineered for accessible, level-access showering environments. Whether the project is a private adaptation or a funded installation through a Disabled Facilities Grant, Impey’s range covers every element of the installation:

  • GRP floor formers at 22 mm thickness, compatible with both timber and concrete floors, with a built-in 1:40 gradient and repositionable waste outlets to navigate underfloor obstructions
  • WaterGuard self-adhesive waterproofing membrane for immediate tiling with no drying time required
  • Square and linear drainage systems with top-access cleaning and flexible outlet positioning
  • Accessible products including fold-flat shower seats, modular grab rails, half-height assisted shower doors, and underfloor heating
  • Technical support, specification guidance, and wetroom training for installers

If you are planning a bedroom wetroom, whether for yourself, a family member, or a client, explore Impey’s wetroom systems or contact the Impey specification team for expert guidance tailored to your project.

Related Articles